news

Acrylic cast-in-place plates have a certain coefficient of expansion

Update:09-07-2019
Summary:

Acrylic bonding surface should be cleaned. If there are […]

Acrylic bonding surface should be cleaned. If there are impurities such as dust and pores, bubbles will be formed when bonding, and the glue will flow unevenly.

Glue should be appropriate

When bonding, if the amount is used less, it will appear if it is not hit, and bubbles will be generated. More will overflow, so you must use the right amount when bonding, long-term processing work, pay attention to the amount of glue used.

temperature control

Ordinary acrylic sheets will deform when the temperature is about 100 degrees. Acrylic products processed above this temperature will lose the unique characteristics of acrylic.

Avoid scratches

Acrylic hardness, acrylic surface hardness is only equivalent to aluminum, should be very careful when using or acrylic processing, to avoid scratching the surface gloss.

Be careful with static electricity

Acrylic processing static electricity, which is easy to generate static electricity and absorb dust in summer or in dry acrylic processing workshops. When cleaning, use a soft cotton cloth dampened with soapy water or water.

Reserve expansion space

Acrylic cast-in-place plates have a certain coefficient of expansion during acrylic processing, so it is important to consider the expansion space of the acrylic sheet during the stacking or acrylic processing of the acrylic sheet.

https://www.pgacrylic.com/