Bevel bonding: The bonding bevel must be at a 90 degree angle to prevent displacement of the surface to be bonded. It should be uniform and slow when applying Kerrybond. The master can be removed after it has been fully cured.

Acrylic is a generic term for acrylic and methacrylic chemicals, commonly known as "specially treated plexiglass." In the field of plastics, acrylic refers to polymethyl methacrylate (PMMA), a thermoplastic engineering plastic with excellent overall properties, mostly used in the form of sheets for outdoor and indoor signage. In the application industry, its materials generally appear in the form of granules, plates, pipes and the like.

The acrylic sheet is divided into a casting plate and a pressing plate according to the production process, and can be divided into a transparent plate and a translucent plate (including a transparent plate of the dyeing plate) according to the transmittance; the impact plate, the anti-UV plate and the color plate are classified according to the performance (including Black and white and color board)

Acrylic also has a kind of recycled material that uses recycled acrylic trim, which is thermally degraded to obtain regenerated MMA (methyl methacrylate) monomer, which is then obtained by chemical polymerization. After a rigorous process, the pure MMA monomer can be re-purchased, and there is no difference in quality from the new synthetic monomer. However, the purity of the degraded monomer produced is not high, and the quality and performance of the sheet are poor after molding.

1. Pure new material transparent acrylic board: A: The light transmittance is greater than 92%, and the cross section is transparent and colorless. B: Excellent UV resistance, no fading, loss of light, yellowing, cracking in outdoor 5-8 years C: high surface hardness, comparable to aluminum and brass D: excellent resistance to cracking and chemical resistance E: High quality protective film that provides adequate protection

When producing and processing acrylic products, different processes are selected according to different products, and the shape, size and the like of the acrylic products formed by the different processes are also different.